Geotechnical News - March 2016 - page 2

An RSTAR System uses data
loggers (nodes) at the sensor level,
deployed in a star topology from an
active RSTAR Hub which consists
of an RST flexDAQ Data Logger.
DT LINK is an on-site wireless
connection to RST data loggers
for quick data collection. Ideal for
hard to access areas where the
data logger is within line of sight.
Above: A DT LINK WIRELESS data logger, connected to a vibrating wire piezometer
and housed in a protective enclosure, has its data collected from a laptop connected
to the DT LINK HUB - all within seconds from the convenience of your vehicle.
DT2011B
Single Channel
Vibrating Wire
Data Logger
DT2055B
5/10 Channel
Vibrating Wire /
Thermistor
Data Logger
DT4205
4-20 mA
Ten Channel
Data Logger
DT2040
20/40 Channel
Vibrating Wire /
Thermistor
Data Logger
DTL201B
and DTL202B
Uniaxial & Biaxial
Digital Tilt Loggers
RST’s “DT Series” data loggers (nodes) can accommodate
the RSTAR System or the DT LINK WIRELESS System.
RSTAR info at: www.rstinstruments.com/rstar.html
DT LINK info at: www.rstinstruments.com/dtlinkwireless.html
Minimum per channel cost Extra long battery life Long distance transmission
FULLY AUTOMATED COLLECTION (remotely) SEMI-AUTOMATED COLLECTION (on-site)
(see data loggers pictured below)
NODE
Up to 7 years of battery life from 1 lithium ‘D’ cell.
Up to 14 km range from Hub to Node in open country.
(depending on antenna type)
Up to 255 nodes per RSTAR Hub.
Based on 900 MHz and 2.4 GHz spread spectrum band.
(country dependent)
F E A T U R E S
Safely & easily collect data from data loggers that are in areas with
poor access, trespass issues and hazardous obstacles.
Years of battery life from 1 lithium ‘D’ cell.
Excellent range up to 800 m (900 MHz) and up to 500 m (2.4 GHz).
Collect data in seconds with a laptop
connected to the compact and portable DT LINK HUB.
F E A T U R E S
RSTAR
HUB
The RSTAR
Hub shown
left contains
a flexDAQ
Data Logger
System with
an antenna
and battery.
Collected data
is saved to
the flexDAQ
memory
where users
can access
it remotely,
either on-site
or off-site.
WIRELESS DATA
COLLECTION from geotechnical
instruments
Whether you collect data from your geotechnical instruments remotely through a
fully automated data acquisition system, or by a semi-automated (on-site) method,
RST Instruments Ltd. has two wireless solutions to quickly get you connected to your data.
info@rstinstruments.com
www.rstinstruments.com
TEL (MAIN) | 604 540 1100
FAX | 604 540 1005
EMAIL | sales@rstinstruments.com
RST Instruments Ltd., 11545 Kingston St., Maple Ridge, BC Canada V2X 0Z5
USA | 831 899 1632 or 303 993 9230
EUROPE / MIDDLE EAST / AFRICA :
+44 7469 256642
RST Instruments Ltd. reserves the right to change specificationswithoutnotice.MIG0296F