Canadian Geotechnical Journal, October 2019 Table of Contents
The October 2019 issue of the Canadian Geotechnical Journal, Volume 56, No. 10 is available online to all CGS members. To access the current and past journals, log into MyCGS on the CGS website then select “Geotechnical Publications” from the left-hand navigation column. Non-CGS members can view the CGJ abstracts and citations for the October issue at: https://www.nrcresearchpress.com/toc/cgj/56/10.
Articles in this issue include:
- On the homogenization and up-scaling of a discrete element method model
- Modeling interaction between loading-induced and creep strains of rockfill materials using a hardening elastoplastic constitutive model
- Exploring the effects of nanoscale zero-valent iron (nZVI) on the mechanical properties of lead-contaminated clay
- Colloidal aspects of incompatibility reactions of bentonite with saline leachates as indicated from a modified fluid loss test
- Centrifugal and numerical modeling of stiffened deep mixed column-supported embankment with slab over soft clay
- Benefits from using two receivers for interpretation of low-strain integrity tests on pipe piles
- Triaxial stress path tests on artificially prepared analogue alpine permafrost soil
- Mechanical behavior of an unsaturated clayey silt: an experimental and constitutive modelling study
- Assessing characteristic value selection methods for design with load and resistance factor design (LRFD) — design robustness perspective
- Evaluation of equivalent hydraulic aperture (EHA) for rough rock fractures
- Strength, stiffness, and microstructure characteristics of biocemented calcareous sand
- Parametric study of fully grouted cable bolts subjected to axial loading
- Constant rate of strain consolidation testing of soft clays and fibrous peats
- Tensile monotonic capacity of helical anchors in sand: interaction between helices