Canadian Geotechnical Journal, June 2021 Table of Contents
The June 2021 issue of the Canadian Geotechnical Journal, Volume 58, No. 6, is available online to all CGS members. To access the current and past journals, log into your MyCGS account on the CGS website then select Geotechnical Publications. Non-CGS members can view the CGJ abstracts and citations for the June issue at: https://cdnsciencepub.com/toc/cgj/58/6.
Articles in the June issue include:
- Massive, continuous, and non-invasive surface measurement of degree of saturation by shortwave infrared images
- A numerical characterization workflow for assessing the strength and failure modes of heterogeneous oil sands
- Use of a bounding surface model in predicting element tests and capacity in boundary value problems
- Crack-resistant cement–bentonite cut-off wall materials incorporating superabsorbent polymers
- Development of a hybrid soil pressure sensor and its application to soil compaction
- Analyzing variation of the water table level with three-dimensional numerical simulations to assess reclamation techniques for an acidic tailings impoundment
- Bearing capacity mechanisms for pipes buried in sand
- Recovery of small-strain stiffness following blast-induced liquefaction based on shear wave velocity measurements
- Increasing density and cement content in stabilization of expansive soils: Conflicting or complementary procedures for reducing swelling?
- Liquefied strength ratio with stress densification and low stresses
- Static liquefaction behaviour of gold mine tailings
- Prediction of coupled hydromechanical behavior of unsaturated soils based on seasonal variations in hydrologic conditions